/***********************************************************************
Function :    uart0_init
Parameters :  nil
Date :  
Desc :        int disabled
              //UART0 initialize
              // desired baud rate: 57600
              // actual: baud rate:57600 (0,0%)
              // char size: 8 bit
              // parity: Disabled
              //ICC-AVR application builder : 04.06.2008 15:23:56
              // Target : M128
              // Crystal: 7.3728Mhz
***********************************************************************/

void uart0_init(void)
{
#ifndef UartOVF
UCSR0B = 0x00; //disable while setting baud rate
UCSR0A = 0x00;
UCSR0C = 0x06;
UBRR0L = 0x07; //set baud rate lo
UBRR0H = 0x00; //set baud rate hi
UCSR0B = 0x18;
#else
UCSR0B = 0x00; //disable while setting baud rate
UCSR0A = 0x00;
UCSR0C = 0x06;
UBRR0L = 0x07; //set baud rate lo
UBRR0H = 0x00; //set baud rate hi
//UCSR0B = 0xB8;
UCSR0B = 0x98;  //without UDR is now empty int
#endif
}




/***********************************************************************
Function :    uart1_init
Parameters :  nil
Date :  
Desc :        int disabled
              //UART1 initialize
              // desired baud rate:57600
              // actual baud rate:57600 (0,0%)
              // char size: 8 bit
              // parity: Disabled
              //ICC-AVR application builder : 04.06.2008 15:23:56
              // Target : M128
              // Crystal: 7.3728Mhz
***********************************************************************/

void uart1_init(void)
{
  
#ifndef UartOVF  
UCSR1B = 0x00; //disable while setting baud rate
UCSR1A = 0x00;
UCSR1C = 0x06;
UBRR1L = 0x07; //set baud rate lo
UBRR1H = 0x00; //set baud rate hi
UCSR1B = 0x18;

#else
UCSR1B = 0x00; //disable while setting baud rate
UCSR1A = 0x00;
UCSR1C = 0x06;
UBRR1L = 0x07; //set baud rate lo
UBRR1H = 0x00; //set baud rate hi
//UCSR1B = 0xB8;
  UCSR1B = 0x98; //without UDR is now empty int
#endif
}

/***********************************************************************
Function :    putchar
Parameters :  
Date :  
Desc :        
***********************************************************************/
void putchar(unsigned char tx_char, unsigned char CASE_UART)
{
  
    switch(CASE_UART)
    {
    case UART_1:{                                        //printing to UART PHONE  
                while( !(UCSR0A & (1 << UDRE0) ) );         // ??????????????????????????????????
                UDR0 = tx_char;
                break;}

    case UART_2:{                                        //printing to UART TUNER  
                while( !(UCSR1A & (1 << UDRE1) ) );         //???????????????????????????????????
                UDR1 = tx_char;
                break;}



    case UART_3:{                                        //printing to UART_3  (SOFT DEBUG UART)
                sUARTtx(tx_char);
                break;}
    }

}