реклама на сайте
подробности

 
 
> xds560 & omap1710, :help:
g-gabber
сообщение Oct 22 2008, 07:08
Сообщение #1





Группа: Новичок
Сообщений: 8
Регистрация: 17-10-08
Пользователь №: 41 022



Здраствуйте,

хочу подключить xds560 к OMAP1710.

Когда запускаю CSS3 получаю следующую ошибку,
Может кто нибудь может мне помочь, help.gif

Зарание большое спасибо!

Код

Warning:
Error 0x40003200/-181
Warning during: OCS, Target, Control,
This error was generated by TI's USCIF driver.

SC_ERR_CTL_NO_TRG_CLOCK <-181>
The controller has detected a dead JTAG clock.
The user must turn-on or connect the JTAG clock.


Sequence ID: 0
Error Code: -181
Error Class: 0x40003200

Board Name: OMAP1710 TDS560USB PLUS Emulator
Cpu Name: ARM9_0

Abort:        Close Code Composer Studio.
Retry:        Try to connect to the target again.
Cancel:        Remain disconnected from the target
Diagnostic:    Run diagnostic utility.

*********************************************
Error connecting to the target:
Error 0x80002240/-121
Fatal Error during: Initialization, OCS, Control,
This error was generated by TI's USCIF driver.

SC_ERR_CMD_HANDLE <-121>
A bad controller handle has been given to a function,
either before attempting to open the controller, or after
having opened the controller and ignored its error status.
Valid controller handles are generated when attempts
to open the controller return a clean error status.


Sequence ID: 0
Error Code: -121
Error Class: 0x80002240

Board Name: OMAP1710 TDS560USB PLUS Emulator
Cpu Name: TMS320C5500_0

Abort:        Close Code Composer Studio.
Retry:        Try to connect to the target again.
Cancel:        Remain disconnected from the target
Diagnostic:    Run diagnostic utility.
Go to the top of the page
 
+Quote Post
 
Start new topic
Ответов (1 - 4)
aaarrr
сообщение Oct 23 2008, 21:39
Сообщение #2


Гуру
******

Группа: Свой
Сообщений: 10 713
Регистрация: 11-12-04
Пользователь №: 1 448



RTCK подключен? Клоки на нем есть?
Go to the top of the page
 
+Quote Post
g-gabber
сообщение Oct 24 2008, 08:19
Сообщение #3





Группа: Новичок
Сообщений: 8
Регистрация: 17-10-08
Пользователь №: 41 022



Цитата(aaarrr @ Oct 23 2008, 23:39) *
RTCK подключен? Клоки на нем есть?

Помойму нет, а какие способы есть проверить RTCK?
Я пробывал замыкать RTCK и TCK, показывало какую то другую ошибку,

ps. извеняюсь за мерские вопросы, но нужно с чего-то начинать,

Сообщение отредактировал g-gabber - Oct 24 2008, 08:20
Go to the top of the page
 
+Quote Post
aaarrr
сообщение Oct 24 2008, 08:32
Сообщение #4


Гуру
******

Группа: Свой
Сообщений: 10 713
Регистрация: 11-12-04
Пользователь №: 1 448



Цитата(g-gabber @ Oct 24 2008, 12:19) *
Помойму нет, а какие способы есть проверить RTCK?

Осциллографом посмотреть. Другие выводы JTAG тоже. Если с железом все на вид нормально, то можно попробовать поставить другие драйверы.
Go to the top of the page
 
+Quote Post
g-gabber
сообщение Oct 24 2008, 09:01
Сообщение #5





Группа: Новичок
Сообщений: 8
Регистрация: 17-10-08
Пользователь №: 41 022



Цитата(aaarrr @ Oct 24 2008, 10:32) *
Осциллографом посмотреть. Другие выводы JTAG тоже. Если с железом все на вид нормально, то можно попробовать поставить другие драйверы.

Я тут ещё нашёл следующего рода информацию:

Цитата
5. SC_ERR_CRL_NO_TRG_CLOCK
This error is reported when the emulator cannot sense a return test clock signal
(RET_CLK) on pin 9 of the JTAG header.
a. Check all cable connections is secure between the emulator and the target.
b. Verify that the target board is routing the test clock (TCK) signak on pin 11 to pin 9. If this
is OMAP or Davinci based board, RET_TCK may be supplied from the RET_TCK pin on there device, and not routed from header pin 11.
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 чел. читают эту тему (гостей: 1, скрытых пользователей: 0)
Пользователей: 0

 


RSS Текстовая версия Сейчас: 19th July 2025 - 13:15
Рейтинг@Mail.ru


Страница сгенерированна за 0.01361 секунд с 7
ELECTRONIX ©2004-2016