void main()
{
NVIC_DisableIRQ(PWM1_IRQn);

//Настраиваем Шим, исключительно для имитации работы процессора с внешней переферией

LPC_SC->PCONP|=1<<6; //PWM power/clock control bit.
LPC_SC->PCLKSEL0&=~(3<<12); //13:12 Peripheral clock selection for PWM1.
LPC_SC->PCLKSEL0|= 1<<12; //PCLK_peripheral = CCLK

LPC_PINCON->PINSEL3&=~(3<<4); //PWM1.1
LPC_PINCON->PINSEL3|= 2<<4; //Pin function PWM1.1 //

LPC_PINCON->PINMODE3&=~(3<<4); //PWM1
LPC_PINCON->PINMODE3|= 2<<4; //Disable pullup & pulldown resistors

LPC_PINCON->PINMODE3&=~(3<<10); //PWM2
LPC_PINCON->PINMODE3|= 2<<10; //Disable pullup & pulldown resistors

// LPC_PINCON->PINSEL3&=~(3<<10); //PWM1.3
// LPC_PINCON->PINSEL3|= 2<<10; //Pin function PWM1.3 //

LPC_PWM1->TCR = (1<<0) | (1<<3); //Counter Enable | PWM Enable
LPC_PWM1->CTCR = 0; //Timer Mode: the TC is incremented when the Prescale Counter matches the Prescale Register.
LPC_PWM1->MCR = (1<<1); //Reset on PWMMR1
LPC_PWM1->PCR = (1<<3) | (1<<9) | (1<<11); // double edge for the PWM3 | The PWM1 output enabled. | The PWM3 output enabled.

LPC_PWM1->MR0 = 26;
LPC_PWM1->MR1 = 25;

LPC_PWM1->MR2 = param_pwm_1_a;
LPC_PWM1->MR3 = param_pwm_1_b;
LPC_PWM1->PR = 0;
LPC_PWM1->LER = 0x000F;
LPC_PWM1->TC = 0;

//настраиваем АЦП

LPC_SC->PCONP|= 1<<12; //ADC ON // A/D converter (ADC) power/clock control bit.
LPC_SC->PCLKSEL0&=~(3<<24); //
LPC_SC->PCLKSEL0|= 3<<24; //ADC clock pclk/8 //PCLK_peripheral = CCLK/8

LPC_PINCON->PINSEL1&=~(3<<14);
LPC_PINCON->PINSEL1|= 1<<14; //Pin function ADC0 //

LPC_PINCON->PINMODE1&=~(3<<14); //ADC0
LPC_PINCON->PINMODE1|= 2<<14; //Disable pullup & pulldown resistors

LPC_ADC->ADCR=(1<<21);
LPC_ADC->ADINTEN=0x0000;
NVIC_DisableIRQ(ADC_IRQn);

//настраиваем цап для вывода результата АЦП во вне

//Power: The DAC is always connected to VDDA. Register access is determined by PINSEL and PINMODE settings (see below).
LPC_SC->PCLKSEL0&=~(3<<22); //
LPC_SC->PCLKSEL0|= 3<<22; //Peripheral clock selection for DAC. pclk/8 //PCLK_peripheral = CCLK/8

LPC_PINCON->PINSEL1&=~(3<<20);
LPC_PINCON->PINSEL1|=2<<20; //Pin function AOUT

LPC_DAC->DACCTRL=0x00;/**/

LPC_ADC->ADCR=(1) | (2<<8) | (1<<24) | (1<<21) | (0<<27);

while (1)
{
if (LPC_ADC->ADSTAT&1)
{
adc_raw=LPC_ADC->ADDR0;
LPC_ADC->ADCR=(1) | (1<<8) | (1<<24) | (1<<21) | (0<<27);
LPC_DAC->DACR=adc_raw&0xFF00;
};
};
}