Проблема с TMS470R1B1M, Не могу подключить программатор-отладчик Опции

[trofimax1]

Имею TMS470R1B1M и IAR J-link, подключаю согласно документации TI.
Пытаюсь инициализировать Segger JlinkARM4.62, уровни на ножках точно повторяют те что на рисунке.

AWD посадил на землю.
В результате получаю:

Application log started
- J-Flash ARM V4.62b (J-Flash compiled Feb 18 2013 17:29:14)
- JLinkARM.dll V4.62b (DLL compiled Feb 18 2013 17:28:44)
Reading flash device list [C:\Program Files\SEGGER\JLinkARM_V462b\ETC\JFlash\Flash.csv] ...
- List of flash devices read successfully (1789 Devices)
Reading MCU device list [C:\Program Files\SEGGER\JLinkARM_V462b\ETC\JFlash\MCU.csv] ...
- List of MCU devices read successfully (2059 Devices)
Opening project file [C:\Documents and Settings\plotnikov.av\Application Data\SEGGER\Default.jflash] ...
- Project opened successfully
Connecting ...
- WARNING: Unexpected core ID. (Found: 0x00000000, Expected: 0x3100E02F, Mask: 0x00000001)
- Connected successfully
Disconnecting ...
- Disconnected
Connecting ...
- WARNING: Unexpected core ID. (Found: 0x00000000, Expected: 0x3100E02F, Mask: 0x00000001)
- Connected successfully
Testing speed ...
- ERROR: RAM check failed @ address 0x00400000.
- ERROR: Write: 0x00010203 04050607
- ERROR: Read: 0x00000000 00000000
- ERROR: (0 bytes of RAM have been checked successfully)
- ERROR: Failed to test speed
Disconnecting ...
- Disconnected

Ядро не определяется, считать память не могу.
Подскажите пожалуйста куда двигаться?

[trofimax1]

Понял, VTRef сразу подключили к Vdd процессора, лог с j-link

SEGGER J-Link Commander V4.62b ('?' for help)
Compiled Feb 18 2013 17:29:05
DLL version V4.62b, compiled Feb 18 2013 17:28:44
Firmware: J-Link ARM V8 compiled Nov 14 2012 22:34:52
Hardware: V8.00
S/N: 158005054
OEM: IAR
VTarget = 3.254V
Info: TotalIRLen = ?, IRPrint = 0x..000000000000000000000000
WARNING: At least one of the connected devices is not JTAG compliant (IEEE Std 1
149.1, 7.1.1.d, IR-cells). (NumDevices = 1, NumBitsSet = 0)

****** Error: Failed to measure TotalIRLen.
Info: TotalIRLen = ?, IRPrint = 0x..000000000000000000000000

WARNING: At least one of the connected devices is not JTAG compliant (IEEE Std 1
149.1, 7.1.1.d, IR-cells). (NumDevices = 1, NumBitsSet = 0)