реклама на сайте
подробности

 
 
> Открытые платы на базе AT91RM9200
dch
сообщение Apr 15 2006, 10:37
Сообщение #1


Профессионал
*****

Группа: Участник
Сообщений: 1 179
Регистрация: 15-09-04
Из: 141070 г. Королев МО, улица Горького 39-121
Пользователь №: 661



Darrell Harmon's Single Board Computer Project

http://www.dlharmon.com/sbc.html

-Atmel AT91RM9200 microcontroller - ARM920T core, MMU, 208PQFP
-Xilinx XC3S200 FPGA (Also supports XC3S400)
-32MB SDRAM connected to AT91RM9200
-32MB SDRAM connected to FPGA
-64MB NAND Flash
-Compact Flash Socket
-2MB Atmel Serial Data Flash for bootloader and kernel
-10/100 Ethernet
-12Mb/s USB
-2 Serial ports
-6-14VDC power input


Open ARM9 SBC
http://www.ime.usp.br/~fr/sbc/

-180 MHz ARM9 processor (Atmel AT91RM9200)
-3 MPixel CMOS sensor (Micron MT9T001)
-Altera Cyclone FPGA with 6000 LEs
-2x32 MBytes of SDRAM (32MB for the ARM9 and 32MB for the FPGA)
-16 Mbits of serial flash
-1 10/100 Intel Ethernet interface
-1 high speed USB 2.0 interface
-1 SPI interface
-1 serial (RS-232) interface

...А случись старшине на полсекунды запоздать с командой -...
Go to the top of the page
 
+Quote Post
 
Start new topic
Ответов
afad
сообщение Jun 2 2006, 13:09
Сообщение #2


Местный
***

Группа: Свой
Сообщений: 212
Регистрация: 26-08-04
Пользователь №: 545



Цитата
Уважаемый Ruslan1, а не могли бы Вы сообщить о найденных ошибках. Мне показалось, что это одна из самых "правильных" схем, с буферизированной шиной (при этом это сделано очень компактно) и т.д. Взял ее за основу, но где же там ошибки?
Go to the top of the page
 
+Quote Post
Dimchansky
сообщение Jun 2 2006, 14:45
Сообщение #3


Участник
*

Группа: Свой
Сообщений: 55
Регистрация: 10-07-05
Пользователь №: 6 685



Цитата(afad @ Jun 2 2006, 15:09) *
Уважаемый Ruslan1, а не могли бы Вы сообщить о найденных ошибках. Мне показалось, что это одна из самых "правильных" схем, с буферизированной шиной (при этом это сделано очень компактно) и т.д. Взял ее за основу, но где же там ошибки?

Я так понял, что ошибки, которые имел ввиду Ruslan1, те, что написаны на самом сайте: WARNING: these files do not work as is. See the errata section.

Errata for 20040720 board
DBGU serial port miswired. The AT91RM9200 schematic symbol is wrong.
Both SOT23-5 packages have wrong pinout. Need to create correct footprints to replace the ones that came with PCB
FPGA oscillator pads are mirrored on the board. Fix footprint.
Crystals are bigger than the symbol - capacitors are underneath their edges. Create more room in next revision.
Not all systems have been tested yet so there may be more.
Go to the top of the page
 
+Quote Post



Reply to this topicStart new topic
1 чел. читают эту тему (гостей: 1, скрытых пользователей: 0)
Пользователей: 0

 


RSS Текстовая версия Сейчас: 20th July 2025 - 07:07
Рейтинг@Mail.ru


Страница сгенерированна за 0.01395 секунд с 7
ELECTRONIX ©2004-2016