Eclipse + ARM Toolchain + OpenOCD, Тормоза в режиме отладки Опции

[doom13]

Приветствую.
Продолжаю осваивать разработку под ARM в Eclipse и всё очень круто и нравится (если сравнивать с CrossWorks и Keil MDK-ARM), но в режиме дебага жутко тормозит. Чтоб перейти от одной точки останова к другой или просто при пошаговом исполнении необходимо время "на подумать". При запуске режима DEBUG также долго думает и что-то там выводит в консоль. Работаю с TI CCS Studio и Altera Nios II IDE, которые построены на базе Eclipse, там всё очень шустро.
Собственно вопрос, возможно ли задать какие-то настройки для Eclipse+OpenOCD, чтобы устранить это явление?
Спасибо.

[doom13]

Это выплёвыватся в консоль при подключении:

CODE

GNU ARM Eclipse 64-bit Open On-Chip Debugger 0.8.0-00063-gbda7f5c (2015-01-31-18:41)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.sourceforge.net/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'jtag'
adapter speed: 10 kHz
adapter_nsrst_delay: 200
jtag_ntrst_delay: 200
cortex_m reset_config sysresetreq
cortex_m reset_config sysresetreq
Started by GNU ARM Eclipse
Info : clock speed 10 kHz
Info : JTAG tap: lpc1788.cpu tap/device found: 0x4ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x4)
Info : lpc1788.cpu: hardware has 6 breakpoints, 4 watchpoints
Info : accepting 'gdb' connection from 3333
undefined debug reason 7 - target needs reset
Info : JTAG tap: lpc1788.cpu tap/device found: 0x4ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x4)
target state: halted
target halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x1fff0080 msp: 0x10001ffc
semihosting is enabled
Info : JTAG tap: lpc1788.cpu tap/device found: 0x4ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x4)
target state: halted
target halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x1fff0080 msp: 0x10001ffc, semihosting
Warn : Verification will fail since checksum in image (0x00000000) to be written to flash is different from calculated vector checksum (0xeffeef9e).
Warn : To remove this warning modify build tools on developer PC to inject correct LPC vector checksum.
Warn : keep_alive() was not invoked in the 1000ms timelimit. GDB alive packet not sent! (2228). Workaround: increase "set remotetimeout" in GDB
Warn : keep_alive() was not invoked in the 1000ms timelimit. GDB alive packet not sent! (2432). Workaround: increase "set remotetimeout" in GDB
Warn : keep_alive() was not invoked in the 1000ms timelimit. GDB alive packet not sent! (2432). Workaround: increase "set remotetimeout" in GDB
Warn : keep_alive() was not invoked in the 1000ms timelimit. GDB alive packet not sent! (2432). Workaround: increase "set remotetimeout" in GDB
Warn : keep_alive() was not invoked in the 1000ms timelimit. GDB alive packet not sent! (2432). Workaround: increase "set remotetimeout" in GDB
Warn : keep_alive() was not invoked in the 1000ms timelimit. GDB alive packet not sent! (2431). Workaround: increase "set remotetimeout" in GDB
Info : JTAG tap: lpc1788.cpu tap/device found: 0x4ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x4)
target state: halted
target halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x1fff0080 msp: 0x10001ffc, semihosting
Info : JTAG tap: lpc1788.cpu tap/device found: 0x4ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x4)
target state: halted
target halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x1fff0080 msp: 0x10001ffc, semihosting
===== arm v7m registers
(0) r0 (/32): 0x00200FE0
(1) r1 (/32): 0x00106900
(2) r2 (/32): 0x100001B4
(3) r3 (/32): 0x00000000
(4) r4 (/32): 0x1000FF9C
(5) r5 (/32): 0x3456ABCD
(6) r6 (/32): 0x12345678
(7) r7 (/32): 0x1000FF30
(8) r8 (/32): 0x00000008
(9) r9 (/32): 0x2F975E05
(10) r10 (/32): 0x49AACFCA
(11) r11 (/32): 0xE79DDDF6
(12) r12 (/32): 0x1FFF1FF1
(13) sp (/32): 0x10001FFC
(14) lr (/32): 0xFFFFFFFF
(15) pc (/32): 0x1FFF0080
(16) xPSR (/32): 0x01000000
(17) msp (/32): 0x10001FFC
(18) psp (/32): 0x1AB2B464
(19) primask (/1): 0x00
(20) basepri (/8): 0x00
(21) faultmask (/1): 0x00
(22) control (/2): 0x00
===== Cortex-M DWT registers
(23) dwt_ctrl (/32)
(24) dwt_cyccnt (/32)
(25) dwt_0_comp (/32)
(26) dwt_0_mask (/4)
(27) dwt_0_function (/32)
(28) dwt_1_comp (/32)
(29) dwt_1_mask (/4)
(30) dwt_1_function (/32)
(31) dwt_2_comp (/32)
(32) dwt_2_mask (/4)
(33) dwt_2_function (/32)
(34) dwt_3_comp (/32)
(35) dwt_3_mask (/4)
(36) dwt_3_function (/32)

Тут вообще долго висит:

Код

Warn : keep_alive() was not invoked in the 1000ms timelimit. GDB alive packet not sent! (2228). Workaround: increase "set remotetimeout" in GDB
Warn : keep_alive() was not invoked in the 1000ms timelimit. GDB alive packet not sent! (2432). Workaround: increase "set remotetimeout" in GDB
Warn : keep_alive() was not invoked in the 1000ms timelimit. GDB alive packet not sent! (2432). Workaround: increase "set remotetimeout" in GDB
Warn : keep_alive() was not invoked in the 1000ms timelimit. GDB alive packet not sent! (2432). Workaround: increase "set remotetimeout" in GDB
Warn : keep_alive() was not invoked in the 1000ms timelimit. GDB alive packet not sent! (2432). Workaround: increase "set remotetimeout" in GDB
Warn : keep_alive() was not invoked in the 1000ms timelimit. GDB alive packet not sent! (2431). Workaround: increase "set remotetimeout" in GDB