MAX10 - Flash Update module Опции

[Jenya7]

Я создал Flash Update module - Tools->IP Catalog->Library->Basic Functions->On Chip Memory->Altera On-Chip Flash

CODE

entity flash_update is
port (
clock : in std_logic := '0'; -- clk.clk
avmm_csr_addr : in std_logic := '0'; -- csr.address
avmm_csr_read : in std_logic := '0'; -- .read
avmm_csr_writedata : in std_logic_vector(31 downto 0) := (others => '0'); -- .writedata
avmm_csr_write : in std_logic := '0'; -- .write
avmm_csr_readdata : out std_logic_vector(31 downto 0); -- .readdata
avmm_data_addr : in std_logic_vector(18 downto 0) := (others => '0'); -- data.address
avmm_data_read : in std_logic := '0'; -- .read
avmm_data_writedata : in std_logic_vector(31 downto 0) := (others => '0'); -- .writedata
avmm_data_write : in std_logic := '0'; -- .write
avmm_data_readdata : out std_logic_vector(31 downto 0); -- .readdata
avmm_data_waitrequest : out std_logic; -- .waitrequest
avmm_data_readdatavalid : out std_logic; -- .readdatavalid
avmm_data_burstcount : in std_logic_vector(3 downto 0) := (others => '0'); -- .burstcount
reset_n : in std_logic := '0' -- nreset.reset_n
);
end entity flash_update;

architecture rtl of flash_update is
component altera_onchip_flash is
generic (
INIT_FILENAME : string := "";
INIT_FILENAME_SIM : string := "";
DEVICE_FAMILY : string := "Unknown";
PART_NAME : string := "Unknown";
DEVICE_ID : string := "Unknown";
SECTOR1_START_ADDR : integer := 0;
SECTOR1_END_ADDR : integer := 0;
SECTOR2_START_ADDR : integer := 0;
SECTOR2_END_ADDR : integer := 0;
SECTOR3_START_ADDR : integer := 0;
SECTOR3_END_ADDR : integer := 0;
SECTOR4_START_ADDR : integer := 0;
SECTOR4_END_ADDR : integer := 0;
SECTOR5_START_ADDR : integer := 0;
SECTOR5_END_ADDR : integer := 0;
MIN_VALID_ADDR : integer := 0;
MAX_VALID_ADDR : integer := 0;
MIN_UFM_VALID_ADDR : integer := 0;
MAX_UFM_VALID_ADDR : integer := 0;
SECTOR1_MAP : integer := 0;
SECTOR2_MAP : integer := 0;
SECTOR3_MAP : integer := 0;
SECTOR4_MAP : integer := 0;
SECTOR5_MAP : integer := 0;
ADDR_RANGE1_END_ADDR : integer := 0;
ADDR_RANGE1_OFFSET : integer := 0;
ADDR_RANGE2_OFFSET : integer := 0;
AVMM_DATA_ADDR_WIDTH : integer := 19;
AVMM_DATA_DATA_WIDTH : integer := 32;
AVMM_DATA_BURSTCOUNT_WIDTH : integer := 4;
SECTOR_READ_PROTECTION_MODE : integer := 31;
FLASH_SEQ_READ_DATA_COUNT : integer := 2;
FLASH_ADDR_ALIGNMENT_BITS : integer := 1;
FLASH_READ_CYCLE_MAX_INDEX : integer := 4;
FLASH_RESET_CYCLE_MAX_INDEX : integer := 29;
FLASH_BUSY_TIMEOUT_CYCLE_MAX_INDEX : integer := 112;
FLASH_ERASE_TIMEOUT_CYCLE_MAX_INDEX : integer := 40603248;
FLASH_WRITE_TIMEOUT_CYCLE_MAX_INDEX : integer := 35382;
PARALLEL_MODE : boolean := true;
READ_AND_WRITE_MODE : boolean := true;
WRAPPING_BURST_MODE : boolean := false;
IS_DUAL_BOOT : string := "False";
IS_ERAM_SKIP : string := "False";
IS_COMPRESSED_IMAGE : string := "False"
);
port (
clock : in std_logic := 'X'; -- clk
reset_n : in std_logic := 'X'; -- reset_n
avmm_data_addr : in std_logic_vector(18 downto 0) := (others => 'X'); -- address
avmm_data_read : in std_logic := 'X'; -- read
avmm_data_writedata : in std_logic_vector(31 downto 0) := (others => 'X'); -- writedata
avmm_data_write : in std_logic := 'X'; -- write
avmm_data_readdata : out std_logic_vector(31 downto 0); -- readdata
avmm_data_waitrequest : out std_logic; -- waitrequest
avmm_data_readdatavalid : out std_logic; -- readdatavalid
avmm_data_burstcount : in std_logic_vector(3 downto 0) := (others => 'X'); -- burstcount
avmm_csr_addr : in std_logic := 'X'; -- address
avmm_csr_read : in std_logic := 'X'; -- read
avmm_csr_writedata : in std_logic_vector(31 downto 0) := (others => 'X'); -- writedata
avmm_csr_write : in std_logic := 'X'; -- write
avmm_csr_readdata : out std_logic_vector(31 downto 0) -- readdata
);
end component altera_onchip_flash;

begin

onchip_flash_0 : component altera_onchip_flash
generic map (
INIT_FILENAME => "",
INIT_FILENAME_SIM => "",
DEVICE_FAMILY => "MAX 10",
PART_NAME => "10M50DAF484C7G",
DEVICE_ID => "50",
SECTOR1_START_ADDR => 0,
SECTOR1_END_ADDR => 8191,
SECTOR2_START_ADDR => 8192,
SECTOR2_END_ADDR => 16383,
SECTOR3_START_ADDR => 16384,
SECTOR3_END_ADDR => 114687,
SECTOR4_START_ADDR => 114688,
SECTOR4_END_ADDR => 188415,
SECTOR5_START_ADDR => 188416,
SECTOR5_END_ADDR => 360447,
MIN_VALID_ADDR => 0,
MAX_VALID_ADDR => 360447,
MIN_UFM_VALID_ADDR => 0,
MAX_UFM_VALID_ADDR => 16383,
SECTOR1_MAP => 1,
SECTOR2_MAP => 2,
SECTOR3_MAP => 3,
SECTOR4_MAP => 4,
SECTOR5_MAP => 5,
ADDR_RANGE1_END_ADDR => 360447,
ADDR_RANGE1_OFFSET => 2048,
ADDR_RANGE2_OFFSET => 0,
AVMM_DATA_ADDR_WIDTH => 19,
AVMM_DATA_DATA_WIDTH => 32,
AVMM_DATA_BURSTCOUNT_WIDTH => 4,
SECTOR_READ_PROTECTION_MODE => 0,
FLASH_SEQ_READ_DATA_COUNT => 4,
FLASH_ADDR_ALIGNMENT_BITS => 2,
FLASH_READ_CYCLE_MAX_INDEX => 5,
FLASH_RESET_CYCLE_MAX_INDEX => 7,
FLASH_BUSY_TIMEOUT_CYCLE_MAX_INDEX => 36,
FLASH_ERASE_TIMEOUT_CYCLE_MAX_INDEX => 10500000,
FLASH_WRITE_TIMEOUT_CYCLE_MAX_INDEX => 9150,
PARALLEL_MODE => true,
READ_AND_WRITE_MODE => true,
WRAPPING_BURST_MODE => false,
IS_DUAL_BOOT => "False",
IS_ERAM_SKIP => "True",
IS_COMPRESSED_IMAGE => "True"
)
port map (
clock => clock, -- clk.clk
reset_n => reset_n, -- nreset.reset_n
avmm_data_addr => avmm_data_addr, -- data.address
avmm_data_read => avmm_data_read, -- .read
avmm_data_writedata => avmm_data_writedata, -- .writedata
avmm_data_write => avmm_data_write, -- .write
avmm_data_readdata => avmm_data_readdata, -- .readdata
avmm_data_waitrequest => avmm_data_waitrequest, -- .waitrequest
avmm_data_readdatavalid => avmm_data_readdatavalid, -- .readdatavalid
avmm_data_burstcount => avmm_data_burstcount, -- .burstcount
avmm_csr_addr => avmm_csr_addr, -- csr.address
avmm_csr_read => avmm_csr_read, -- .read
avmm_csr_writedata => avmm_csr_writedata, -- .writedata
avmm_csr_write => avmm_csr_write, -- .write
avmm_csr_readdata => avmm_csr_readdata -- .readdata
);
end architecture rtl; -- of flash_update

Мне нужно два имиджа - бутлодер (CFM0) а с него я буду прожигать основную програму(CFM1-CFM2). Поэтому мне нужен Dual Compressed Images.
Выставляю Assignments -> Device -> Devise and Pin Options -> Configuration -> Dual Compressed Images
В генериках выставляю

Код

IS_DUAL_BOOT        => "True",
IS_ERAM_SKIP        => "True",
IS_COMPRESSED_IMAGE => "True"

При компиляции получаю ошибку.

Error (169130): Configuration mode specified as Remote but remote update block is not found in design

Если выставляю Assignments -> Device -> Devise and Pin Options -> Configuration -> Single Compressed Image
И генерики

Код

IS_DUAL_BOOT        => "False",
IS_ERAM_SKIP        => "True",
IS_COMPRESSED_IMAGE => "True"

Компилируется без ошибок.

Если выставляю Assignments -> Device -> Devise and Pin Options -> Configuration -> Single Compressed Image
И генерики

Код

IS_DUAL_BOOT        => "True",
IS_ERAM_SKIP        => "True",
IS_COMPRESSED_IMAGE => "True"

При компиляции получаю ошибку.

Error (14740): Configuration mode on atom "bootloader:U_BOOTLOADER|flash_update:U_FLASH_UPDATE|altera_onchip_flash:onc
hip_flash_0|altera_onchip_flash_block:altera_onchip_flash_block|ufm_block" does not match the project setting. Update and regenerate the Qsys system to match the project setting.

Как бороться с этой бедой?

Сообщение отредактировал Jenya7 - Apr 3 2018, 07:47

[DmitryR]

Configuration mode specified as Remote but remote update block is not found in design

Надо сделать так, чтобы он бы found. Вставить то есть. Ибо без него вы не сможете сделать даже программную перезагрузку, и тем более не сможете сказать чипу, что он должен загрузиться из второй партиции.

Блок этот правда называется не Remote Update, а Dual Configuration или Dual Boot, в этом подстава.