HFSS10, Вопрос по установке. Опции

[Vladimir_]

Имею дистрибутив HFSS10.0 Build July 14 2005 13:35:13

WindowsXP Professional Rus SP2

Ставлю, запускаю.

При попытке запустить любой проект из example, ругается на невозможность создать файлы в temp-каталоге. Подозреваю, что не нравится длинное русское имя подкаталого "Мои документы". Создаю отдельный каталог с английским именем, переставляю HFSS. Больше на невозможность создания temp-файлов она не ругается, но при дальнейшем анализе структуры выдает ошибку:
cavity (C:/Program Files/Ansoft/HFSS10/Examples/Projects/cavity/)
HFSSModel1
[error] Lambda refining mesh, process mesh3d : Error while opening or writing the mesh files. (10:29 ñåí 27, 2006)
[error] Simulation completed with execution error on server: Local Machine. (10:29 ñåí 27, 2006)

При повторном запуске:

cavity (C:/Program Files/Ansoft/HFSS10/Examples/Projects/cavity/)
HFSSModel1
[error] Lambda refining mesh, process mesh3d : Error while opening or writing the mesh files. (10:29 ñåí 27, 2006)
[error] Simulation completed with execution error on server: Local Machine. (10:29 ñåí 27, 2006)
[error] Adapting mesh, process mesh3d : Unexpected internal software error code 1054 with module id 0. (10:29 ñåí 27, 2006)
[error] Simulation completed with execution error on server: Local Machine. (10:29 ñåí 27, 2006)
Идеи закончились. Может быть кто-то уже встречался с подобным? Или прости дистрибутив у меня неудачный?
Заранее спасибо. Владимир.

[navuho]

Идеи закончились. Может быть кто-то уже встречался с подобным? Или прости дистрибутив у меня неудачный?

1. Создайте отдельную папку для HFSS проектов. (C\MyProject)
2. Переназначьте в HFSS путь к временным файлам (что-нибудь покороче, типа C:\TEMP)

Может поможет. Если нет, то залейте ваш project, посмотрим ....

[Vladimir_]

Идеи закончились. Может быть кто-то уже встречался с подобным? Или прости дистрибутив у меня неудачный?

1. Создайте отдельную папку для HFSS проектов. (C\MyProject)
2. Переназначьте в HFSS путь к временным файлам (что-нибудь покороче, типа C:\TEMP)

Может поможет. Если нет, то залейте ваш project, посмотрим ....

Именно с этих шагов я и начал разбираться с ошибками.
Т.е. создал
C:/HFSS10Proj
C:/temp
Переназначил в оболочке пути к ним.
Проект OptimTee из examples HSSS10. Прилагаю.
Спасибо за помощь! Владимир.

Да, и для полноты описания ошибки при анализе проекта:

OptimTee (C:/HFSSProj/)
TeeModel
[error] Lambda refining mesh, process mesh3d : Unexpected internal software error code 1054 with module id 0. (1:27 ñåí 28, 2006)
[error] Simulation completed with execution error on server: Local Machine. (1:27 ñåí 28, 2006)
[info] Parametric Analysis on ParametricSetup1 has been started. (1:27 ñåí 28, 2006)
[info] A variation (offset='0in') has been requested (1:27 ñåí 28, 2006)
[error] Lambda refining mesh, process mesh3d : Unexpected internal software error code 1051 with module id 0. (1:27 ñåí 28, 2006)
[warning] Failed to extract solution for 'Power11: Freq(Single value at 10GHz)'. (1:27 ñåí 28, 2006)
[warning] Failed to extract solution for 'Power21: Freq(Single value at 10GHz)'. (1:27 ñåí 28, 2006)
[warning] Failed to extract solution for 'Power31: Freq(Single value at 10GHz)'. (1:27 ñåí 28, 2006)
[info] A variation (offset='0.1in') has been requested (1:27 ñåí 28, 2006)
[error] Initial mesh, process mesh3d : Error while opening or writing the mesh files. (1:27 ñåí 28, 2006)
[warning] Failed to extract solution for 'Power11: Freq(Single value at 10GHz)'. (1:27 ñåí 28, 2006)
[warning] Failed to extract solution for 'Power21: Freq(Single value at 10GHz)'. (1:27 ñåí 28, 2006)
[warning] Failed to extract solution for 'Power31: Freq(Single value at 10GHz)'. (1:27 ñåí 28, 2006)
[info] A variation (offset='0.2in') has been requested (1:27 ñåí 28, 2006)
[error] Initial mesh, process mesh3d : Error while opening or writing the mesh files. (1:27 ñåí 28, 2006)
[warning] Failed to extract solution for 'Power11: Freq(Single value at 10GHz)'. (1:27 ñåí 28, 2006)
[warning] Failed to extract solution for 'Power21: Freq(Single value at 10GHz)'. (1:27 ñåí 28, 2006)
[warning] Failed to extract solution for 'Power31: Freq(Single value at 10GHz)'. (1:27 ñåí 28, 2006)
[info] A variation (offset='0.3in') has been requested (1:27 ñåí 28, 2006)
[error] Initial mesh, process mesh3d : Error while opening or writing the mesh files. (1:27 ñåí 28, 2006)
[warning] Failed to extract solution for 'Power11: Freq(Single value at 10GHz)'. (1:27 ñåí 28, 2006)
[warning] Failed to extract solution for 'Power21: Freq(Single value at 10GHz)'. (1:27 ñåí 28, 2006)
[warning] Failed to extract solution for 'Power31: Freq(Single value at 10GHz)'. (1:27 ñåí 28, 2006)
[info] A variation (offset='0.4in') has been requested (1:27 ñåí 28, 2006)
[error] Initial mesh, process mesh3d : Error while opening or writing the mesh files. (1:27 ñåí 28, 2006)
[warning] Failed to extract solution for 'Power11: Freq(Single value at 10GHz)'. (1:27 ñåí 28, 2006)
[warning] Failed to extract solution for 'Power21: Freq(Single value at 10GHz)'. (1:27 ñåí 28, 2006)
[warning] Failed to extract solution for 'Power31: Freq(Single value at 10GHz)'. (1:27 ñåí 28, 2006)
[info] A variation (offset='0.5in') has been requested (1:27 ñåí 28, 2006)
[error] Initial mesh, process mesh3d : Error while opening or writing the mesh files. (1:27 ñåí 28, 2006)
[warning] Failed to extract solution for 'Power11: Freq(Single value at 10GHz)'. (1:27 ñåí 28, 2006)
[warning] Failed to extract solution for 'Power21: Freq(Single value at 10GHz)'. (1:27 ñåí 28, 2006)
[warning] Failed to extract solution for 'Power31: Freq(Single value at 10GHz)'. (1:27 ñåí 28, 2006)
[info] A variation (offset='0.6in') has been requested (1:27 ñåí 28, 2006)
[error] Adjusting 3D mesh for ports, process mesh3d : Unexpected internal software error code 1054 with module id 0. (1:27 ñåí 28, 2006)
[warning] Failed to extract solution for 'Power11: Freq(Single value at 10GHz)'. (1:27 ñåí 28, 2006)
[warning] Failed to extract solution for 'Power21: Freq(Single value at 10GHz)'. (1:27 ñåí 28, 2006)
[warning] Failed to extract solution for 'Power31: Freq(Single value at 10GHz)'. (1:27 ñåí 28, 2006)
[info] A variation (offset='0.7in') has been requested (1:27 ñåí 28, 2006)
[error] Lambda refining mesh, process mesh3d : Unexpected internal software error code 1054 with module id 0. (1:27 ñåí 28, 2006)
[warning] Failed to extract solution for 'Power11: Freq(Single value at 10GHz)'. (1:27 ñåí 28, 2006)
[warning] Failed to extract solution for 'Power21: Freq(Single value at 10GHz)'. (1:27 ñåí 28, 2006)
[warning] Failed to extract solution for 'Power31: Freq(Single value at 10GHz)'. (1:27 ñåí 28, 2006)
[info] A variation (offset='0.8in') has been requested (1:27 ñåí 28, 2006)
[error] Lambda refining mesh, process mesh3d : Unexpected internal software error code 1054 with module id 0. (1:27 ñåí 28, 2006)
[warning] Failed to extract solution for 'Power11: Freq(Single value at 10GHz)'. (1:27 ñåí 28, 2006)
[warning] Failed to extract solution for 'Power21: Freq(Single value at 10GHz)'. (1:27 ñåí 28, 2006)
[warning] Failed to extract solution for 'Power31: Freq(Single value at 10GHz)'. (1:27 ñåí 28, 2006)
[info] A variation (offset='0.9in') has been requested (1:27 ñåí 28, 2006)
[error] Initial mesh, process mesh3d : Error while opening or writing the mesh files. (1:27 ñåí 28, 2006)
[warning] Failed to extract solution for 'Power11: Freq(Single value at 10GHz)'. (1:27 ñåí 28, 2006)
[warning] Failed to extract solution for 'Power21: Freq(Single value at 10GHz)'. (1:27 ñåí 28, 2006)
[warning] Failed to extract solution for 'Power31: Freq(Single value at 10GHz)'. (1:27 ñåí 28, 2006)
[info] A variation (offset='1in') has been requested (1:27 ñåí 28, 2006)
[error] Initial mesh, process mesh3d : Error while opening or writing the mesh files. (1:27 ñåí 28, 2006)
[warning] Failed to extract solution for 'Power11: Freq(Single value at 10GHz)'. (1:27 ñåí 28, 2006)
[warning] Failed to extract solution for 'Power21: Freq(Single value at 10GHz)'. (1:27 ñåí 28, 2006)
[warning] Failed to extract solution for 'Power31: Freq(Single value at 10GHz)'. (1:27 ñåí 28, 2006)
[info] Parametric Analysis is done. (1:27 ñåí 28, 2006)
[info] Optimization Analysis on OptimizationSetup1 has been started. (1:27 ñåí 28, 2006)
[info] A variation (offset='0in') has been requested (1:27 ñåí 28, 2006)
[error] Adjusting 3D mesh for ports, process mesh3d : Unexpected internal software error code 1054 with module id 0. (1:27 ñåí 28, 2006)
[error] Failed to calculate cost for 'Power31-2*Power21'. (1:27 ñåí 28, 2006)
[info] A variation (offset='0.1in') has been requested (1:27 ñåí 28, 2006)
[error] Initial mesh, process mesh3d : Error while opening or writing the mesh files. (1:27 ñåí 28, 2006)
[info] A variation (offset='0.2in') has been requested (1:27 ñåí 28, 2006)
[error] Initial mesh, process mesh3d : Error while opening or writing the mesh files. (1:27 ñåí 28, 2006)
[info] A variation (offset='0.3in') has been requested (1:27 ñåí 28, 2006)
[error] Initial mesh, process mesh3d : Error while opening or writing the mesh files. (1:27 ñåí 28, 2006)
[info] A variation (offset='0.4in') has been requested (1:27 ñåí 28, 2006)
[error] Initial mesh, process mesh3d : Error while opening or writing the mesh files. (1:27 ñåí 28, 2006)
[info] A variation (offset='0.5in') has been requested (1:27 ñåí 28, 2006)
[error] Initial mesh, process mesh3d : Error while opening or writing the mesh files. (1:27 ñåí 28, 2006)
[info] A variation (offset='0.6in') has been requested (1:27 ñåí 28, 2006)
[error] Lambda refining mesh, process mesh3d : Unexpected internal software error code 1054 with module id 0. (1:28 ñåí 28, 2006)
[info] A variation (offset='0.7in') has been requested (1:28 ñåí 28, 2006)
[error] Lambda refining mesh, process mesh3d : Unexpected internal software error code 1054 with module id 0. (1:28 ñåí 28, 2006)
[info] A variation (offset='0.8in') has been requested (1:28 ñåí 28, 2006)
[error] Lambda refining mesh, process mesh3d : Unexpected internal software error code 1054 with module id 0. (1:28 ñåí 28, 2006)
[info] A variation (offset='0.9in') has been requested (1:28 ñåí 28, 2006)
[error] Initial mesh, process mesh3d : Error while opening or writing the mesh files. (1:28 ñåí 28, 2006)
[info] A variation (offset='1in') has been requested (1:28 ñåí 28, 2006)
[error] Lambda refining mesh, process mesh3d : Unexpected internal software error code 1054 with module id 0. (1:28 ñåí 28, 2006)
[error] Optimization Analysis failed - No valid initial value given. (1:28 ñåí 28, 2006)

Прикрепленные файлы

 OptimTee.rar ( 5.45 килобайт ) Кол-во скачиваний: 65