LPC 2888 Опции

[aka-cobra]

Всем привет!
Кто-нибудь работал с этим девайсом? Приобрел evaluation board от nohau и j-link. Плата работает нормально. Программа загружается в проц и все работает, но если сделать reset питания, то в контроллере продолжает работать старая программа, а новая не сохраняется в памяти. В чем тут проблема? Программу пишу на С IAR Workbench IDE. И еще вопрос... а чем можно программировать (какой программатор) эти процы?
За ранее благодарен.

[aka-cobra]

Если посмотреть Debug Log:

Tue Aug 14 18:10:52 2007: DLL version: V3.74f, compiled Aug 10 2007 17:57:34
Tue Aug 14 18:10:52 2007: Firmware: J-Link compiled Jun 28 2007 10:45:08 ARM Rev.5
Tue Aug 14 18:10:52 2007: JTAG speed is initially set to: 32 kHz
Tue Aug 14 18:10:52 2007: J-Link found 1 JTAG device. ARM core Id: 4F1F0F0F(ARM7)
Tue Aug 14 18:10:52 2007: Device at TAP0 selected
Tue Aug 14 18:10:52 2007: RTCK is not connected
Tue Aug 14 18:10:52 2007: Auto JTAG speed: 1000 kHz
Tue Aug 14 18:10:53 2007: 2744 bytes verified (5.54 Kbytes/sec)
Tue Aug 14 18:10:53 2007: Warning:
Verify error at address 0x104007B8, target byte: 0x56, byte in file: 0x00
Tue Aug 14 18:10:53 2007: Warning:
Verify error at address 0x104007B9, target byte: 0x36, byte in file: 0x00
Tue Aug 14 18:10:53 2007: Warning:
Verify error at address 0x104007BF, target byte: 0x08, byte in file: 0x00
Tue Aug 14 18:10:53 2007: Warning:
Verify error at address 0x104007C0, target byte: 0x14, byte in file: 0x00
Tue Aug 14 18:10:53 2007: Warning:
Verify error at address 0x104007C1, target byte: 0x22, byte in file: 0x4F
Tue Aug 14 18:10:53 2007: Warning:
Verify error at address 0x104007C2, target byte: 0x41, byte in file: 0x00
Tue Aug 14 18:10:53 2007: Warning:
Verify error at address 0x104007C7, target byte: 0x14, byte in file: 0x00
Tue Aug 14 18:10:53 2007: Warning:
Verify error at address 0x104007C8, target byte: 0x14, byte in file: 0x07
Tue Aug 14 18:10:53 2007: Warning:
Verify error at address 0x104007C9, target byte: 0x14, byte in file: 0x00
Tue Aug 14 18:10:53 2007: Warning:
Verify error at address 0x104007CA, target byte: 0x14, byte in file: 0x07
Tue Aug 14 18:10:53 2007: Warning:
Verify error at address 0x104007CB, target byte: 0x14, byte in file: 0x00
Tue Aug 14 18:10:53 2007: Warning:
Verify error at address 0x104007CF, target byte: 0x00, byte in file: 0x14
Tue Aug 14 18:10:53 2007: Warning:
Verify error at address 0x104007D0, target byte: 0x41, byte in file: 0x7F
.
.
.
.
Tue Aug 14 18:10:53 2007: Warning: Too many verify errors, only the first 200 are displayed
Tue Aug 14 18:10:53 2007: There were warnings during download, see Log Window
Tue Aug 14 18:10:59 2007: Loaded debugee: C:\Nohau\SeehauARM\Examples\Philips\LPC2800\IAR\blinky\Debug\Exe\blinky_lcd_eflash.elf
Tue Aug 14 18:10:59 2007: Target reset