Specctra 15.7 не ставит VIA под SMD площадками Опции

[VictorR]

Не знает ли кто, почему в ручном режиме SPECCTRA размещает перех. отв. под площадками SMD элементов, а в автоматическом нет?

[Vlad-od]

You can control whether vias are allowed under SMD pads by using the via_at_smd rule.

rule pcb (via_at_smd [off | on [(grid [off | on])] | [(fit [off | on])] | [(thru [off | on])]])

When the via_at_smd rule is on, the autorouter can place vias under SMD pads. The default setting is off.
Example:

rule pcb (via_at_smd on)

Copyright © January 2002 Cadence Design Systems, Inc.

[VictorR]

You can control whether vias are allowed under SMD pads by using the via_at_smd rule.

rule pcb (via_at_smd [off | on [(grid [off | on])] | [(fit [off | on])] | [(thru [off | on])]])

When the via_at_smd rule is on, the autorouter can place vias under SMD pads. The default setting is off.
Example:

rule pcb (via_at_smd on)

Copyright © January 2002 Cadence Design Systems, Inc.

Это-то мы и сами знаем. А все равно не ставит!
ёмоё!