
Эти модули не сыроваты, а "имеющие большой потенциал" для upgrade.
По умолчанию модули XBee работают с квитированием (имеют адрес=000000000). Для broadcasting адрес должен быть такой:
To send a broadcast packet to all modules regardless of 16-bit or 64-bit addressing, set destination
addresses of all the modules as shown below.
Sample Configuration (All modules in the network):
• DL (Destination Low Address) = 0x0000FFFF
• DH (Destination High Address) = 0x00000000