SEGGER J-Link Commander V3.68b ('?' for help)
Compiled Mar 30 2007 16:52:53
DLL version V3.68b, compiled Mar 30 2007 16:52:49
Firmware: J-Link compiled Mar 22 2007 16:08:22 ARM Rev.5
Hardware: V5.00
S/N : 11111117
OEM : IAR
Feature(s) : , , , , , , ,
VTarget = 3.261V
JTAG speed: 30 kHz

****** Error: Could not find ARM7 / ARM9 device on JTAG chain
Trying to connect with 5 kHz !


****** Error: Could not find ARM7 / ARM9 device on JTAG chain


J-Link>st
VTarget=3.261V
ITarget=0mA
TCK=1 TDI=0 TDO=1 TMS=0 TRES=1 TRST=1
Supported JTAG speeds:
- 48 MHz/n, (n>=4). => 12000kHz, 9600kHz, 8000kHz, ...
- Adaptive clocking


J-Link>rx 250
Reset delay: 250 ms
Reset type NORMAL: Using RESET pin, halting CPU after Reset
Info: Resetting target using RESET pin
Info: Halting CPU core
Info: Resetting target using RESET pin
Info: Halting CPU core
Info: Resetting target using BP@0.

****** Error: Received 0xFFFFFFFF as core Id. No communication with core.
Bad JTAG communication: Write to IR: Expected 0x1, got 0x7 (TAP Command : 2) @ O
ff 0x5.
Could not find ARM7 / ARM9 device on JTAG chain