Вот лог:
Код
DLL version: V3.86g, compiled Jul 11 2008 10:48:30
Firmware: J-Link ARM V7 compiled Jul 10 2008 18:12:47
Selecting SWD as current target interface.
JTAG speed is initially set to: 32 kHz
Hardware reset with strategy 1 was performed
Initial reset was performed
JLINK command: ProjectFile = E:\**********.jlink, return = 0
JLINK command: device = LPC2917, return = 0
17384 bytes downloaded and verified (22.64 Kbytes/sec)
Warning: Verify error, failed to read memory at address 0x00000000 - 0x0000003F
************
Warning: There were warnings during download, see Log Window
Fatal error: Can not read register 9 (R9), CPU may not be halted
Firmware: J-Link ARM V7 compiled Jul 10 2008 18:12:47
Selecting SWD as current target interface.
JTAG speed is initially set to: 32 kHz
Hardware reset with strategy 1 was performed
Initial reset was performed
JLINK command: ProjectFile = E:\**********.jlink, return = 0
JLINK command: device = LPC2917, return = 0
17384 bytes downloaded and verified (22.64 Kbytes/sec)
Warning: Verify error, failed to read memory at address 0x00000000 - 0x0000003F
************
Warning: There were warnings during download, see Log Window
Fatal error: Can not read register 9 (R9), CPU may not be halted
Где могла порыться собака?
