Phase 4.2
...
ERROR:Place:872 - Delay element
"eth23/eth23/v4_emac_block/rgmii_rxd_rising_0_i(0)" has been placed at
ILOGIC_X0Y155 due to the following location constraint on component
"RGMII_RXD_0(0)":
COMP "RGMII_RXD_0(0)" LOCATE = SITE "N21" LEVEL 1
However, the delay controller that calibrates this delay element has not been
used. Please instantiate a delay controller and apply appropriate location
constraint, or instantiate one delay controller for the design with out any
location constraint. Please refer to the usage document to use the controller
efficiently.
ERROR:Place:872 - Delay element
"eth23/eth23/v4_emac_block/rgmii_rxd_rising_0_i(1)" has been placed at
ILOGIC_X0Y154 due to the following location constraint on component
"RGMII_RXD_0(1)":
COMP "RGMII_RXD_0(1)" LOCATE = SITE "M21" LEVEL 1
However, the delay controller that calibrates this delay element has not been
used. Please instantiate a delay controller and apply appropriate location
constraint, or instantiate one delay controller for the design with out any
location constraint. Please refer to the usage document to use the controller
efficiently.
ERROR:Place:872 - Delay element
"eth23/eth23/v4_emac_block/rgmii_rxd_rising_0_i(2)" has been placed at
ILOGIC_X0Y153 due to the following location constraint on component
"RGMII_RXD_0(2)":
COMP "RGMII_RXD_0(2)" LOCATE = SITE "N18" LEVEL 1
However, the delay controller that calibrates this delay element has not been
used. Please instantiate a delay controller and apply appropriate location
constraint, or instantiate one delay controller for the design with out any
location constraint. Please refer to the usage document to use the controller
efficiently.
ERROR:Place:872 - Delay element
"eth23/eth23/v4_emac_block/rgmii_rxd_rising_0_i(3)" has been placed at
ILOGIC_X0Y152 due to the following location constraint on component
"RGMII_RXD_0(3)":
COMP "RGMII_RXD_0(3)" LOCATE = SITE "N17" LEVEL 1
However, the delay controller that calibrates this delay element has not been
used. Please instantiate a delay controller and apply appropriate location
constraint, or instantiate one delay controller for the design with out any
location constraint. Please refer to the usage document to use the controller
efficiently.
ERROR:Place:850 - Delay element
"eth23/eth23/v4_emac_block/rgmii_rxd_rising_1_i(0)" has been placed at
ILOGIC_X1Y103, however, the delay controller that calibrates this element has
not been used. If a delay controller has been instantiated and a location
constraint has been applied to it, please constraint this delay element to
the same region. If a delay controller has not been instantiated please
instantiate one. Please refer to the usage document to use the delay
controller efficiently.
ERROR:Place:850 - Delay element
"eth23/eth23/v4_emac_block/rgmii_rxd_rising_1_i(1)" has been placed at
ILOGIC_X1Y102, however, the delay controller that calibrates this element has
not been used. If a delay controller has been instantiated and a location
constraint has been applied to it, please constraint this delay element to
the same region. If a delay controller has not been instantiated please
instantiate one. Please refer to the usage document to use the delay
controller efficiently.
ERROR:Place:850 - Delay element
"eth23/eth23/v4_emac_block/rgmii_rxd_rising_1_i(2)" has been placed at
ILOGIC_X1Y111, however, the delay controller that calibrates this element has
not been used. If a delay controller has been instantiated and a location
constraint has been applied to it, please constraint this delay element to
the same region. If a delay controller has not been instantiated please
instantiate one. Please refer to the usage document to use the delay
controller efficiently.
ERROR:Place:850 - Delay element
"eth23/eth23/v4_emac_block/rgmii_rxd_rising_1_i(3)" has been placed at
ILOGIC_X1Y109, however, the delay controller that calibrates this element has
not been used. If a delay controller has been instantiated and a location
constraint has been applied to it, please constraint this delay element to
the same region. If a delay controller has not been instantiated please
instantiate one. Please refer to the usage document to use the delay
controller efficiently.
ERROR:Place:872 - Delay element
"eth23/eth23/v4_emac_block/rgmii_rx_ctl_rising_0_i" has been placed at
ILOGIC_X0Y148 due to the following location constraint on component
"RGMII_RX_CTL_0":
COMP "RGMII_RX_CTL_0" LOCATE = SITE "R16" LEVEL 1
However, the delay controller that calibrates this delay element has not been
used. Please instantiate a delay controller and apply appropriate location
constraint, or instantiate one delay controller for the design with out any
location constraint. Please refer to the usage document to use the controller
efficiently.
ERROR:Place:850 - Delay element
"eth23/eth23/v4_emac_block/rgmii_rx_ctl_rising_1_i" has been placed at
ILOGIC_X1Y97, however, the delay controller that calibrates this element has
not been used. If a delay controller has been instantiated and a location
constraint has been applied to it, please constraint this delay element to
the same region. If a delay controller has not been instantiated please
instantiate one. Please refer to the usage document to use the delay
controller efficiently.
WARNING:Place:851 - The delay controller "eth23/eth23/v4_emac_block/dlyctrl_0"
has been locked with the following location constraint:
COMP "eth23/eth23/v4_emac_block/dlyctrl_0" LOCATE = SITE "IDELAYCTRL_X0Y6"
LEVEL 1
However, none of the delay elements calibrated by this controller are being
used. The controller will still use up a global clock resource from the clock
region and consume power. Please refer to the usage document to use the
controller efficiently.
WARNING:Place:851 - The delay controller "eth23/eth23/v4_emac_block/dlyctrl_1"
has been locked with the following location constraint:
COMP "eth23/eth23/v4_emac_block/dlyctrl_1" LOCATE = SITE "IDELAYCTRL_X0Y1"
LEVEL 1
However, none of the delay elements calibrated by this controller are being
used. The controller will still use up a global clock resource from the clock
region and consume power. Please refer to the usage document to use the
controller efficiently.
WARNING:Place:851 - The delay controller
"eth23/eth23/v4_emac_block/dlyctrl_clk_0" has been locked with the following
location constraint:
COMP "eth23/eth23/v4_emac_block/dlyctrl_clk_0" LOCATE = SITE
"IDELAYCTRL_X1Y5" LEVEL 1
However, none of the delay elements calibrated by this controller are being
used. The controller will still use up a global clock resource from the clock
region and consume power. Please refer to the usage document to use the
controller efficiently.
WARNING:Place:851 - The delay controller
"eth23/eth23/v4_emac_block/dlyctrl_clk_1" has been locked with the following
location constraint:
COMP "eth23/eth23/v4_emac_block/dlyctrl_clk_1" LOCATE = SITE
"IDELAYCTRL_X1Y2" LEVEL 1
However, none of the delay elements calibrated by this controller are being
used. The controller will still use up a global clock resource from the clock
region and consume power. Please refer to the usage document to use the
controller efficiently.