Помощь - Поиск - Пользователи - Календарь
Полная версия этой страницы: Neocell в RHEL5
Форум разработчиков электроники ELECTRONIX.ru > Cистемный уровень проектирования > Разработка цифровых, аналоговых, аналого-цифровых ИС
Ed2000
Понадобилось использовать Neocell в RHEL5.
Не работает...
Точнее встраивается в IC5141 корректно, но при вызове оттуда пишет:
"/path/NeoCell/bin.linux/cedit: relocation error: /path/NeoCell/external/windu/lib.linux_i32/libwinsock50.so: symbol h_errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference"

Посмотрев по различным форумам решения так и не нашел.

Может кто уже пробовал такое сочетание?

***

PS!
1) По данным сайта компании Cadence Neocell поддерживается только до RHEL4.
2) Подобная проблема обсуждалась на форуме Cadence: http://www.cadence.com/Community/forums/p/12006/16398.aspx
Но там не говорится о найденном решении. 05.gif
iteamo
common problem after install IC5141 in REHL5 OS,
"missing libxx... ..".
This is due to RHEL5 not install all necessary rpm for the IC5141.
Solution: get your RHEL5 DISC and find the following rpm
compat-libf2c-34-3.4.6-4.i386.rpm
compat-libf2c-34-3.4.6-4.x86_64.rpm
compat-libstdc++-296-2.96-138.i386.rpm
compat-libstdc++-33-3.2.3-61.i386.rpm
compat-libstdc++-33-3.2.3-61.x86_64.rpm
libXp-1.0.0-8.1.el5.i386.rpm
libXp-1.0.0-8.1.el5.x86_64.rpm
libXp-devel-1.0.0-8.1.el5.i386.rpm
libXp-devel-1.0.0-8.1.el5.x86_64.rpm
ncompress-4.2.4-47.x86_64.rpm
openmotif22-2.2.3-18.i386.rpm
openmotif22-2.2.3-18.x86_64.rpm
openmotif-2.3.1-2.el5.i386.rpm
openmotif-2.3.1-2.el5.x86_64.rpm
openmotif-devel-2.3.1-2.el5.i386.rpm
openmotif-devel-2.3.1-2.el5.x86_64.rpm
copy those rpm into your system and do the install.
Assume you put those rpm files into /tmp/rpm direcotry. do the install as follows:
"rpm -i /tmp/rpm/*rpm"
After the rpm installed, you shall not have any problem to use IC5141.
If you have above rpm install, you also shall not have any issue to run any CADENCE or SYNOPSYS tools.
Ed2000
Thanks for the reply.
Firstly I do not have any problem with IC5141 at RHEL5.
But that is not a case for the Neocell.

Did you try to use Neocell in RHEL5?



Цитата(iteamo @ Sep 24 2011, 15:54) *
common problem after install IC5141 in REHL5 OS,
"missing libxx... ..".
This is due to RHEL5 not install all necessary rpm for the IC5141.
Solution: get your RHEL5 DISC and find the following rpm
compat-libf2c-34-3.4.6-4.i386.rpm
compat-libf2c-34-3.4.6-4.x86_64.rpm
compat-libstdc++-296-2.96-138.i386.rpm
compat-libstdc++-33-3.2.3-61.i386.rpm
compat-libstdc++-33-3.2.3-61.x86_64.rpm
libXp-1.0.0-8.1.el5.i386.rpm
libXp-1.0.0-8.1.el5.x86_64.rpm
libXp-devel-1.0.0-8.1.el5.i386.rpm
libXp-devel-1.0.0-8.1.el5.x86_64.rpm
ncompress-4.2.4-47.x86_64.rpm
openmotif22-2.2.3-18.i386.rpm
openmotif22-2.2.3-18.x86_64.rpm
openmotif-2.3.1-2.el5.i386.rpm
openmotif-2.3.1-2.el5.x86_64.rpm
openmotif-devel-2.3.1-2.el5.i386.rpm
openmotif-devel-2.3.1-2.el5.x86_64.rpm
copy those rpm into your system and do the install.
Assume you put those rpm files into /tmp/rpm direcotry. do the install as follows:
"rpm -i /tmp/rpm/*rpm"
After the rpm installed, you shall not have any problem to use IC5141.
If you have above rpm install, you also shall not have any issue to run any CADENCE or SYNOPSYS tools.

KriegerNsk
Цитата(Ed2000 @ Sep 29 2011, 01:56) *
Thanks for the reply.
Firstly I do not have any problem with IC5141 at RHEL5.
But that is not a case for the Neocell.

Did you try to use Neocell in RHEL5?


Тут смысл тот же просто. У вас в системе либо нет необходимых библиотек, либо не подходят версии.
Библиотеки можно нарыть на просторах интернета.
Для просмотра полной версии этой страницы, пожалуйста, пройдите по ссылке.
Invision Power Board © 2001-2025 Invision Power Services, Inc.