ГОСПОДА!!! И правда мистика.....Вот - только что взял свой код и адаптировал его под CodeVision - только лишь синтаксически изменил способ включения/выключения портов. Ну и небольшое отличие в синтаксисе инициализации АЦП.
ВСЕ РАБОТАЕТ!!!!
Типерь внимание:
Я убрал задержки отовсюду, посадил это дело на оптику. Частота чипа - 16 МГц, частота АЦП 125 кГц. Запустил цикл, а в главнои цикле добавил включение диода 5 порта D, если будет хотябы одна ошибка.
Колоссальное количество таких операций в секунду. И вот 5 минут у меня девайс работает - ни одной ошибки.
ПРостите мне мою глупую просьбу, но посмотрите предыдущий код и этот, для CodeVision - одинаково ли настроены АЦП? просто я уже устал...
Код
#include <stdio.h>
#include <stdlib.h>
#include <mega32.h>
#include <delay.h>
int crc;
int ReadADC(unsigned char ChannelNum)
{
ADMUX=ChannelNum| 0x00;
// Start the AD conversion
ADCSRA|=0x40;
// Wait for the AD conversion to complete
while ((ADCSRA & 0x10)==0);
ADCSRA|=0x10;
return ADCW;
}
send_pack(unsigned char byte)
{
int i,x,j,b;
unsigned char _bit, recieved_byte;
recieved_byte=0x00;
PORTC=0x00;
for (i=0;i<8;i++)
{
_bit=(byte >> i) & 0x01;
if (_bit==1)
{
PORTD.0 =1;
PORTD.1=0;
}
if (_bit==0)
{
PORTD.0 =0;
PORTD.1=1;
}
// delay_ms(200);
x=ReadADC(0);
if (x>50) // ýòî åñëè èñïëüçóåì ÀÖÏ
// if (PINA.7==1) // À ýòî åñëè èñïîëüçóåì âõîä ïîðòà âêëþ÷åííûé íà ïðèåì.
{
PORTC |=1<<i;// îòîáðàæàåì òåêóøèé áèò (êî âñåì âûõîäàì ïîðòà Ñ ïîäêëþ÷åíû ñâåòîäèîäû)
_bit=1;
}
if (x<51)
// if (PINA.7==0)
{
PORTC |=0<<i; // îòîáðàæàåì òåêóøèé áèò (êî âñåì âûõîäàì ïîðòà Ñ ïîäêëþ÷åíû ñâåòîäèîäû)
_bit=0;
}
recieved_byte |= _bit << i; // Êëåèì ïðèíÿòûé áàéò...
}
// delay_ms(500);
if (recieved_byte==byte) return 1;
return 0;
}
void main ()
{
DDRD=0xFF;
DDRC=0xFF;
DDRA.7=1;
ADMUX=0x00;
ADCSRA=0x87;
while (1)
{
crc=send_pack(rand());
if (crc==1)
{
PORTD.7 =1; // åñëè áàéò ïåðåäàí ïðàâèëüíî, òî çàæèãàåì ñâåòîäèîä.
}
if (crc==0)
{
PORTD.5 =1;
}
}
}
И честное слово обидно ... что третий день бьюсь и бестолку.
Обидно за себя, потому как все эти три дня считал себя недостойным даже звания любителя.
А тут бах - и за полчаса сделал...
Господа, наверное и у вас есть такое чувство - когда вы над чем-то бьетесь, сколько бы времени это не отнимало - вы всегда чувствуете "вектор" направленный в сторону проблемы и есть ощущение того, что еерешение - это вопрос времени.
Но вот когда этого "вектора" нет - проблема действительно оказывается мистической..
Вот еще makefile - гляньте, может здесь собака зарыта...
Код
#
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF (for use with AVR Studio 3.x or VMLAB).
#
# make extcoff = Convert ELF to AVR Extended COFF (for use with AVR Studio
# 4.07 or greater).
#
# make load = Download the hex file to the device, using avrdude. Please
# customize the avrdude settings below first!
#
# make filename.s = Just compile filename.c into the assembler code only
#
# To rebuild project do "make clean" then "make all".
#
# MCU name
MCU = atmega32
# Output format. (can be srec, ihex, binary)
FORMAT = ihex
# Target file name (without extension).
TARGET = nnn
# Optimization level, can be [0, 1, 2, 3, s]. 0 turns off optimization.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
# s seems to be size optimized
OPT = 0
SRC = nnn.c
# If there is more than one source file, append them above, or modify and
# uncomment the following:
#SRC += foo.c bar.c
# You can also wrap lines by appending a backslash to the end of the line:
#SRC += baz.c \
#xyzzy.c
# List Assembler source files here.
ASRC =
# List any extra directories to look for include files here.
# Each directory must be seperated by a space.
EXTRAINCDIRS =
# Optional compiler flags.
# -g: generate debugging information (for GDB, or for COFF conversion)
# -O*: optimization level
# -f...: tuning, see gcc manual and avr-libc documentation
# -Wall...: warning level
# -Wa,...: tell GCC to pass this to the assembler.
# -ahlms: create assembler listing
DEBUG_LEVEL=-g
WARNINGS=-Wall -Wextra -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-align -Wsign-compare \
-Waggregate-return -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wunused
CFLAGS = -D GCC_MEGA_AVR -I. \
$(DEBUG_LEVEL) -O$(OPT) \
-funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums \
$(WARNINGS) \
$(patsubst %,-I%,$(EXTRAINCDIRS))
# -Wa,-adhlns=$(<:.c=.lst) \
# Set a "language standard" compiler flag.
# Unremark just one line below to set the language standard to use.
# gnu99 = C99 + GNU extensions. See GCC manual for more information.
#CFLAGS += -std=c89
#CFLAGS += -std=gnu89
#CFLAGS += -std=c99
CFLAGS += -std=gnu99
# Optional assembler flags.
# -Wa,...: tell GCC to pass this to the assembler.
# -ahlms: create listing
# -gstabs: have the assembler create line number information; note that
# for use in COFF files, additional information about filenames
# and function names needs to be present in the assembler source
# files -- see avr-libc docs [FIXME: not yet described there]
ASFLAGS = -Wa,-adhlns=$(<:.asm=.lst),-gstabs
# Optional linker flags.
# -Wl,...: tell GCC to pass this to linker.
# -Map: create map file
# --cref: add cross reference to map file
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
# Additional libraries
# Minimalistic printf version
#LDFLAGS += -Wl,-u,vfprintf -lprintf_min
# Floating point printf version (requires -lm below)
#LDFLAGS += -Wl,-u,vfprintf -lprintf_flt
# -lm = math library
LDFLAGS += -lm -L../glcd/. -lglcd
# ---------------------------------------------------------------------------
# Define directories, if needed.
DIRAVR = c:/Programme/AVR/Winavr
DIRAVRBIN = $(DIRAVR)/bin
DIRAVRUTILS = $(DIRAVR)/utils/bin
DIRINC = .
DIRLIB = $(DIRAVR)/avr/lib
# Define programs and commands.
SHELL = sh
CC = avr-gcc
OBJCOPY = avr-objcopy
OBJDUMP = avr-objdump
SIZE = avr-size
REMOVE = rm -f
COPY = cp
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
ELFSIZE = $(SIZE) -A $(TARGET).elf
# Define Messages
# English
MSG_ERRORS_NONE = Errors: none
MSG_BEGIN = -------- begin --------
MSG_END = -------- end --------
MSG_SIZE_BEFORE = Size before:
MSG_SIZE_AFTER = Size after:
MSG_COFF = Converting to AVR COFF:
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
MSG_FLASH = Creating load file for Flash:
MSG_EEPROM = Creating load file for EEPROM:
MSG_EXTENDED_LISTING = Creating Extended Listing:
MSG_SYMBOL_TABLE = Creating Symbol Table:
MSG_LINKING = Linking:
MSG_COMPILING = Compiling:
MSG_ASSEMBLING = Assembling:
MSG_CLEANING = Cleaning project:
# Define all object files.
OBJ = $(SRC:.c=.o) $(ASRC:.asm=.o)
# Define all listing files.
LST = $(ASRC:.asm=.lst) $(SRC:.c=.lst)
# Combine all necessary flags and optional flags.
# Add target processor to flags.
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS)
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
all: begin gccversion sizebefore $(TARGET).elf $(TARGET).hex $(TARGET).eep \
$(TARGET).lss $(TARGET).sym sizeafter finished end
# Eye candy.
# AVR Studio 3.x does not check make's exit code but relies on
# the following magic strings to be generated by the compile job.
begin:
@echo
@echo $(MSG_BEGIN)
finished:
@echo $(MSG_ERRORS_NONE)
end:
@echo $(MSG_END)
@echo
# Display size of file.
sizebefore:
@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi
sizeafter:
@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
# Display compiler version information.
gccversion :
@$(CC) --version
# Convert ELF to COFF for use in debugging / simulating in
# AVR Studio or VMLAB.
COFFCONVERT=$(OBJCOPY) --debugging \
--change-section-address .data-0x800000 \
--change-section-address .bss-0x800000 \
--change-section-address .noinit-0x800000 \
--change-section-address .eeprom-0x810000
coff: $(TARGET).elf
@echo
@echo $(MSG_COFF) $(TARGET).cof
$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
extcoff: $(TARGET).elf
@echo
@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
# Create final output files (.hex, .eep) from ELF output file.
%.hex: %.elf
@echo
@echo $(MSG_FLASH) $@
$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
%.eep: %.elf
@echo
@echo $(MSG_EEPROM) $@
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
# Create extended listing file from ELF output file.
%.lss: %.elf
@echo
@echo $(MSG_EXTENDED_LISTING) $@
$(OBJDUMP) -h -S $< > $@
# Create a symbol table from ELF output file.
%.sym: %.elf
@echo
@echo $(MSG_SYMBOL_TABLE) $@
avr-nm -n $< > $@
# Link: create ELF output file from object files.
.SECONDARY : $(TARGET).elf
.PRECIOUS : $(OBJ)
%.elf: $(OBJ)
@echo
@echo $(MSG_LINKING) $@
$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS)
# Compile: create object files from C source files.
%.o : %.c
@echo
@echo $(MSG_COMPILING) $<
$(CC) -c $(ALL_CFLAGS) $< -o $@
# Compile: create assembler files from C source files.
%.s : %.c
$(CC) -S $(ALL_CFLAGS) $< -o $@
# Assemble: create object files from assembler source files.
#%.o : %.S
# @echo
# @echo $(MSG_ASSEMBLING) $<
# $(CC) -c $(ALL_ASFLAGS) $< -o $@
%.o : %.asm
@echo
@echo $(MSG_ASSEMBLING) $<
$(CC) -c $(ALL_ASFLAGS) $< -o $@
# Target: clean project.
clean: begin clean_list finished end
clean_list :
@echo
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).hex
$(REMOVE) $(TARGET).eep
$(REMOVE) $(TARGET).obj
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
$(REMOVE) $(TARGET).obj
$(REMOVE) $(TARGET).a90
$(REMOVE) $(TARGET).sym
$(REMOVE) $(TARGET).lnk
$(REMOVE) $(TARGET).lss
$(REMOVE) $(OBJ)
$(REMOVE) $(LST)
$(REMOVE) $(SRC:.c=.s)
$(REMOVE) $(SRC:.c=.d)
# Automatically generate C source code dependencies.
# (Code originally taken from the GNU make user manual and modified
# (See README.txt Credits).)
#
# Note that this will work with sh (bash) and sed that is shipped with WinAVR
# (see the SHELL variable defined above).
# This may not work with other shells or other seds.
#
%.d: %.c
set -e; $(CC) -MM $(ALL_CFLAGS) $< \
| sed 's,\(.*\)\.o[ :]*,\1.o \1.d : ,g' > $@; \
[ -s $@ ] || rm -f $@
# Remove the '-' if you want to see the dependency files generated.
include $(SRC:.c=.d)
# you need to erase first before loading the program.
# load (program) the software into the eeprom:
load: $(TARGET).hex
uisp -dlpt=/dev/parport0 --erase -dprog=dapa
uisp -dlpt=/dev/parport0 --upload if=$(TARGET).hex -dprog=dapa -v=3 --hash=32
rdfuses:
uisp -dlpt=/dev/parport0 -dprog=dapa --rd_fuses
@echo " "
@echo "Explanation: See page 290 of data sheet"
# use internal RC oscillator 1 Mhz
wrfuse1mhz:
uisp -dlpt=/dev/parport0 -dprog=dapa --wr_fuse_l=0xe1
# use internal RC oscillator 4 Mhz
wrfuse4mhz:
uisp -dlpt=/dev/parport0 -dprog=dapa --wr_fuse_l=0xe3
# use internal RC oscillator 8 Mhz
wrfuse8mhz:
uisp -dlpt=/dev/parport0 -dprog=dapa --wr_fuse_l=0xe4
# use external crystal with internal oscillator
wrfuseCrystal:
uisp -dlpt=/dev/parport0 -dprog=dapa --wr_fuse_l=0xef
uisp -dlpt=/dev/parport0 -dprog=dapa --wr_fuse_h=0xD9
# Listing of phony targets.
.PHONY : all begin finish end sizebefore sizeafter gccversion coff extcoff \
clean clean_list program load
), то можно сделать так:
.